Crafts/Home & Garden
We have had numerous requests for information regarding the coating of Garden Accessories and Fountains with our metallic coatings and patinas. These tough coatings can be used on any number of applications, on any substrata and are only limited by the imagination of user. The pictures on this page show garden accessories including resin fountains coated with our metallic coating. Antique green patina verdigris solution was added to the metallic coating to complete the antique look.

FOLLOW THESE SIX SIMPLE STEPS

• Clean or wash off all dirt, oils and grease, flaking paint and remove all rust or oxidation.
• Prime all non-metal surfaces with our clear primer sealer. Metal surfaces must be primed with a high quality epoxy primer.
• Apply the first coat of Metallic Coating to all surface area with brush, roller or sprayer. Allow 24 hours curing time between coats.
• Apply second coat of Metallic Coating. Temperatures should be between 40 F & 80 F.
• If a Verdigris Patina finish is desired, mist the green spatina solution on the second coat of the Metallic Coating while it is still damp to the touch. Use a fine misting bottle sprayer.

YOU’RE DONE, THE PATINA WILL CHANGE TO AN ANTIQUE FINISH WITHIN 30 MINUTES.
Please call 800-882-7004 to order our craft pack, which includes enough product to coat approximately 25 square feet. This craft pack has one quart of primer sealer, one quart of either copper or bronze metallic coating, one pint of green patina and application instructions. For larger projects, we ship any of our products in one gallon quantities through out the continental U.S.

To order, please call us at: 1-800-882-7004